Page 8 - Manual – Gas patio heater G21 – Inferno
P. 8

If the PILOT is blocked by debris, spider webs etc., the pilot flame might be small and the
             flame failure device may have not heated up enough for the main burner to work. If this
             happens i tis necessary to clean the pilot and its gas tube.
             To clean the PILOT, remove the burner and pilot cover as detailed above, inspect the pilot
             injector and tubing for blockage. If obstructed, clean with compressed air. Clean the flame
             failure device as well. Assembly is a reversal of above steps.


           Technical details:
           Appliance category:  3+(28-30/37)  3B/P(30)  3B/P(50)    3B/P(37)
                                            Butane,     Butane,     Butane,
           Type of gas:      Butane   Propane  propane,   propane, their   propane, their
                                            their mixture  mixture  mixture
                             28 - 30
           Gas pressure:            37 mbar  29 mbar    50 mbar     37 mbar
                             mbar
           Outlet pressure of the   30
           regulator:        mbar   37 mba  29 mbar     50 mbar     37 mbar

           Injector:
           Appliance category:  3+(28-30/37)  3B/P(30)  3B/P(50)    3B/P(37)
                                            Butane,     Butane,     Butane,
           Type of gas:      Butane  Propane  propane,   propane, their   propane, their
                                            their mixture  mixture  mixture
                             28 - 30
           Gas pressure:            37 mbar  29 mbar    50 mbar     37 mbar
                             mbar
           Leistungsaufnahme gesamt:  13 kW (butan: 945 g/h, propan: 928 g/h

                                                        1,50 mm main   1,70 mm main
                             1,80 mm main burner        burner      burner
           Injector size:
                             0,18 mm pilot burner       0,18 mm pilot   0,18 mm pilot
                                                        burner      burner
           The marking (e.g. 1.90 on the injector) indicates that the   0063/20
           size of it is 1.90 mm.
   3   4   5   6   7   8   9   10   11   12   13