Page 6 - Manual – Sous vide G21 – Maestro

Operating Instructions
1. Choose the suitable container, fix the machine in the container.
2. Put the food in vacuum package into the container.
3. Add water into the container. (Attention: Please make sure the water between Min line and
Max line after add the water into the container)
4. Connect the power.
5. Press “+” and “-” simultaneously to select the unit of temperature, the default unit is °C.
6. Click to select the temperature or time to be adjusted, and set the target value with the
“+” and “-” keys.
7. After finishing the setting, click to start working.
8. When the temperature reach to the set temperature, the machine will beep, then press
button, it will count down.
9. After the cooking is finished, the machine will beep. Click to end the machine work.
• Note: If there is no operation, the machine will emit a continuous beep after 20S, while the
water temperature will remain at the preset temperature.
10. Take foods out, then the food is ready for afterward process.
11. After using the machine, cut off the power supply. Store the machine at the place out of the
children’s contact.
WiFi
Press and hold the and buttons at the same time for 3 to 5 seconds until the WiFi icon
starts flashing.
Choose “Add appliance” in the G21 SmartHome app, then click on the Sous Vide cooker and
follow the instructions in the app.
Maintenance
To avoid burning, please make sure that the machine is off and cooled down to room
temperature before cleaning.
1. Place the machine vertically after cleaning, do not place it horizontally or upside down.
2. During cleaning, do not damage the components inside the machine. Once the components
are damaged, please the G21 authorized service center to have it checked and repaired.
Do not attempt unauthorized repairs to avoid accidents.
3. Discharge the used water after each use, and fill with fresh water next time. To clean the
heating unit and the probe, disassemble the lower cover (“How to disassemble quickly“).
We recommend to clean the heating unit and the probe when you’ve used the appliance for
20 times or when it has been working for 100 hours in total.
4. Do not put the appliance in cold water when it is hot. Let the machine cool down to room
temperature and then put it into cool water to use. Otherwise it will influence the machine
function and lifetime. On the contrary, please do not put cool down machine into hot water
to use.
How to Disassemble Quickly
• Use the tool to remove screw.
• Pull out the low part housing to clean the inner components.