Page 4 - Manual – Sous vide G21 – Maestro

• Appliances can be used by persons with reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards involved
Product Function

1. TEMP / TIME
Temperature, time adjustment switch button
At standby mode, click the button to go to temperature or time setting.
The first press - the display is flashing, set the desired temperature by pressing ” +” and ” -”.
The second press - the display is flashing, set the desired time by pressing ” +” and ” -”. The
third press - the display stops flashing, the machine is confirming the set temperature and time.
After the display flashes 10 times, if there is no any setting change made, the set temperature
and time is set and confirmed. If you need to reset them, press the button to enter the setting
status.
The set temperature and time will show in 3 seconds intervals alternately when you long press
the button.

2. START/STOP
In standby mode, press the button - machine starts working.
Second Press , the time starts to count down, the display shows the current temperature and
time in turns at about 3s intervals.
Third Press , the machine will stop working, back to standby mode.

3.
Adjustment button: Click the button to select the content (temperature or time) to be
adjusted, then use the „+“ and „-“ buttons to adjust to the desired temperature or time.
The temperature unit switch: Press the ”+”, ” -” buttons at the same time to switch and select the
unit of temperature. There are Celsius and Fahrenheit as options.
4. Display
Before the time counts down, the display always shows the current temperature. After
countdown begins, the display shows the current temperature and the remaining work time in
turns at about 3s intervals.