Page 6 - Manual – Blender G21 – Perfection

Control panel
1. ON button - Turns on the appliance. OFF button - Turns off the appliance.
2. Speed button - sets the speed of the appliance. Start at the “MIN” and turn the button towards
“MAX” to increase the speed. Turn button from “MAX” to “MIN” to decrease the speed.
Caution: Always start the appliance from MIN speed position.
Pulse button - “ON” position overrides the appliance at the highest possible speed. Release the
button and the appliance reduces speed until it stops.

Operation
Before starting the appliance, check the following:
The jar is correctly attached to the base.
The lid on the container must be securely closed.
The speed button is in MIN speed position.
1. Plug the appliance into an electrical outlet.
2. Place the jar on the base.
3. Insert the food into the jar. Do not exceed the MAX marking on the jar.
4. Before turning on the appliance, select the lowest speed, then choose the appropriate speed.
5. When finished, switch the appliance off and wait until the appliance stops completely, then
remove and empty jar.
Blending Tips
When inserting the food materials into the jar, please be aware of the order. First pour the liquid,
add ice and finally food.
It is better to use a low speed and then increase the speed.
If the food materials are pushed toward the jar wall you set too high speed. You should reduce speed.
The appliance is equipped with protection against overheating to avoid damaging of the motor.
After switching off wait till the appliance cool down completely, then turn on the appliance. If the
appliance does not have enough cooling, the appliance does not start again, you have to let the
appliance cool down for longer time.