Page 9 - Manual – Multifunctional fryer G21 – Inovation
P. 9
Troubleshooting
Error Explanation Solution
Plug the power cord into the ground
The product is The power unplugged. socket.
not working
Loose internal wires. Contact G21 Authorized Service.
The machine is not Start working after plugging into the power
Fan does not connected. plug.
rotate Motor damage or short circuit
of other components. Contact G21 Authorized Service.
Placed too many food If there are too many food materials, put
materials on the grid. them on the grid in batches.
Food materials The set temperature is too Set the temperature control knob to the
not fully fried
low. desired temperature.
Baking time is too short. Extend cooking time.
Food materials Placed too many food If there are too many food materials, put
not fully materials on the grid. them on the grid in batches.
steamed Steaming time is too short. Extend cooking time.
The fried food Traditional fried ingredients Suitable fried snacks can be used. For
ingredients are are not used. non-oil food materials, a layer of oil can be
not crispy brushed on the surface of the food.
It is a normal phenomenon that there will
Baking greasy food materials. be a lot of smoke leakage when cooking
White smoke greasy food.
comes out There is still a residue of
grease in the fryer from the Be sure to clean the fryer after each
last baking. baking.
The head of the machine is
Steam escaped not properly covered. Cover the machine head in place.
from the outside
of the machine Seal failure. The lid seal is inserted upside down,
remove it and insert it correctly.
Error codes
Error code Explanation Solution
“E01” The cavity thermostat is open. Contact G21 Authorized Service.
The cavity temperature sensor
“E02” Contact G21 Authorized Service.
short-circuited.
The boiler temperature sensor
“E03” Contact G21 Authorized Service.
is open.
The boiler temperature sensor
“E04” Contact G21 Authorized Service.
has short-circuited.
Abnormal power panel zero-
“E05” Contact G21 Authorized Service.
crossing module.