Page 8 - Manual – Blender G21 – Ultimate

Press program B button – the display will show “Sec: 038” which means you set the program
successfully.

2.7. Program C
In standby mode, press and hold buttons “Set” and program C at the same time, until you
hear a beep. Step 01: press the + button on the right side of control panel and choose speed
3. Then press + button on the left side of control panel and choose 10 seconds. Press the
OK button to move to step 02. Choose speed H for 165 seconds, press OK and move to
step 03. Choose speed 0 for 0 second, shortly press the “Set” button to save the settings.
Press program C button – the display will show “Sec: 180” which means you set the program
successfully.
Tip: Listed data above are for instance, you can set the programs however you like.

3. Cancellation of Smart DIY programs
If you want to cancel your DIY settings (let’s say program A), press and hold both program A
and OK buttons for 3 seconds. It deletes what you have set and goes back to factory settings.

Operation
Before starting, make sure the jar is fit securely and completely to the blender base, the lid is fit on
the jar and the sound enclosure is closed at position.
1. Plug in the Blender, get ready to use.
2. Fill food materials into the Jar, do not exceed the MAX marking (1.2L) on the Jar.
3. This appliance is built-in a safety device, please close the Sound Enclosure on position. It
triggers the safety switch to enable the machine to work.
4. Press on On/off button, all buttons on the control panel light up.
4.1. Adjust the speed and working time, then press on Start/Stop button to begin mixing job;
you can adjust mixing speed and time during this manual control mixing procedure.
4.2. Choose a pre-set program, then press on Start/Stop button to begin mixing job.
5. When finished, turn off the machine, wait until the machine stops completely, open the sound
enclosure and remove the jar from the blender base.

Blending tips:
• Make sure the lid is fit on the jar in good position, or the vacuum job won‘t be processed
efficiently.
• When pouring the food materials into the jar, please be aware of the order. Put liquid type of
food and soft food material first, then put ice, then add solid food materials.
• During blending process, if the food materials are being pushed towards the jar wall, it means
the RPM is too high, speed should be reduced. On the other hand, if the food materials are
moving above the blade, it means the speed is too slow, needs to be increased.
• This blender is equipped with overload protective switch in order to protect the motor in
overload situations. Please wait until the motor has cooled off (can use fan to blow the base
cooled off), then turn on the appliance to restart. If the motor didn’t cool down enough, the
machine probably can not be started or start for a short time then shut off again.