Page 5 - Manual – Blender G21 – Ultimate

Caution:
1. Check whether the machine has not been damaged during transportation.
2. Check the packaging part – instruction manual, blender, upper and lower sound enclosures,
lid, mixing jar (including blade assembly, retainer nut), blender base.
3. The appliance should be placed at a steady position. Do not lean the machine. Also, do not
put near flammable objects.
4. Do not have the appliance in contact with direct sunlight or rain.
5. Do not use extension plugs.
6. Do not fill the mixing jar over the MAX mark (1,2 L).

Safety instructions
1. Please read the manual before using.
2. Make sure the cord power is 220-240 V.
3. This appliance is not intended to be used by people (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
4. Do not allow children to play with or use this appliance. Keep them at a safe distance from
the appliance while operating.
5. Be well noted that for safety reasons, the appliance won’t work without the sound enclosure
being closed at position.
6. This appliance is designed for cold mixing only. Do not fill with any ingredients with temperature
higher than 40 °C.
7. Ensure the Lid is fit on position so that the vacuum process is efficient.
8. Do not put any metal items into the mixing jar (like knife, fork, spoon etc..)
9. Do not let the appliance dry-blend (run without any liquid inside the jar) for more than
90 seconds, since dry-blending creates extremely high temperature in a short time. It may
damage the appliance. If necessary, dry-blend for 1 minute followed by 1 minute rest, then
dry-blend again.
10. In case the blade is loose or broken, stop any operation and contact the distributor.
11. Before disassembling or cleaning the appliance, please remember to turn off the power and
unplug the appliance.
12. Do not wash or soak the blender base with/into water to prevent electricity shock.
13. Do not immerse the jar into water or put into washing machine. It will cause rust on the bottom
of the blades assembly, then cause damage to the appliance itself.
14. Use a brush or a thick cloth to clean the blades.
15. If any malfunction occurs, remember to always unplug the appliance, let the motor cool down,
try if the appliance is working or not and contact the distributor eventually.
16. In case of power cord damage, contact the distributor, do not replace it by yourself.
17. One mixing cycle should not exceed 5 minutes. When mixing dense mixtures, the mixing time
should not exceed approximately 2 minutes. A break must be taken between individual mixing
cycles to allow the blade bearing to cool down to prevent damage to the blades or container.
18. You have purchased a new product that has not yet been used. During the first working
cycles, the surface finish of the new engine carbons wears out. This process creates an odor
that disappears after the finish wears off. This fact is completely normal and is not a defect.