Page 5 - Manual – Countertop Reverse Osmosis System G21 – Osmo Pro

WASH
The button is used to clean the internal components of the device and the water tanks and to drain
the accumulated water. We recommend using this program before first use, after changing the
filter and after restarting after a long period of inactivity. Long press the “Wash” button to start the
automatic cleaning. The whole process will take 6 minutes.
FILTER SPAN
These indicators indicate the life of the filters. A white indicator indicates normal filter life,
an orange indicator indicates that the filter has reached 80% of its life, and a red indicator indicates
that the filter needs to be replaced immediately.

RESET
After replacing the filter, press the “Reset” button to start the new filter life countdown. Long press
the “Reset” button for 3 seconds, then immediately press the corresponding button 1-3 for the
replaced filter. Long press the “Reset” button again to complete the filter replacement.
PURIFY
This indicator shows the operating status of the device. If the indicator is on, it means that the
water is being filtered. If the indicator is flashing, it indicates that the water filter is being rinsed.
When these processes are completed, the indicator will go out.
FRESH WATER
If the “Fresh water” indicator is on, it means there is no water in the water tank. Remove the tank,
pour out the waste water and pour fresh water into the tank again.
NO WATER
If the “No water” indicator is on, it means that the built-in filtered water tank is empty. You must
wait for the next water filtration.

SMALL CUP
Fill with 150 ml of water. First press the “Small cup” button and then select the desired
water temperature.

BIG CUP
Fill with 300 ml of water. First press the “Big Cup” button and then select the desired water
temperature.

Press to fill with water. Press again to stop filling.

NORMAL – press to fill with water at a temperature of 10–30 °C.
MILK – press to fill with water at a temperature of 45-48 °C.
COLD – press to fill water with a temperature of ≤15°C. (The panel will display “PREP”, which
means cold water is being prepared. When cooling is complete, “COOL” will be displayed.)
COFFEE – press to fill with water at a temperature of 82-86 °C.
TEA – press to fill with water at a temperature of 88-92 °C.
HOT – press to fill with water at a temperature of ≥90 °C.