Page 4 - Manual – Biometric safe G21

Lockout
Five continuously wrong entries will activate the warning beep for 10 seconds and the keypad will
be locked for 1 minute.
Factory reset
Press reset button for over 5 seconds with a long beep and flashing green indicator. All the finger-
print information has been cleared.

Vibration Mode
To activate the vibration mode, press the reset button twice within one second. The green indicator
will flash once without any beep, it means the vibration mode operation is successful.
To turn off the vibration mode, press the reset button twice within one second again. The green
indicator ring will flash one time with a beep.
Mounting
The safe can stand freely or be anchored to the wall or floor.

Drill holes for expansion bolts (or clamping screws) in your chosen place.
Use the expansion bolts (or clamping screws) to secure the safe to the wall or on the floor.
Make sure the safe is mounted in place as required and then tighten all bolts (screws).

Caution:
Use the expansion bolt when there is a concrete wall surface.
Use the clamping screw when there is a wooden wall surface.

The English version of the manual is an exact translation of the original manufacturer‘s instructions.
Images used in this manual are for illustrational purposes only and may differ from the actual product.