Page 3 - Manual – Biometric safe G21

EN

Thank you for purchasing our product.
Before using this unit, please read this manual.
To be retained for future reference.

1. Removable Shelf 5. Backup Key Entry
2. Reset Button 6. Biometric scanner
3. Battery Compartment 7. Storage compartment for model
4. Locking Bolts 600 x 420 x 380 mm

Initial Use
1. Find the emergency keys in the accessory bag.
2. Slide the emergency lock cover.
3. Insert the backup key, turn the key clockwise to grant access to your safe

Caution: Finish operation, pull out the emergency key and keep it in a safe place. Please do not
put the key inside the safe.
Insert the Batteries
1. With the door open, find the battery compartment at the back of the door.
2. Insert 4x 1.5V fresh batteries into the battery box.

Caution: Please do not mix new and old batteries.
Enter Your Fingerprint
1. Press the reset button, you will hear 1 beep and the indicator ring will flash green once.
2. Put your finger on the fingerprint scanner, until it flashes green and beeps one time.
3. Repeat at least 5 times until there are 2 consecutive beeps and green light on.
4. Check the registered fingerprint if it could open the door before closing it.
5. You can register total 29 fingerprints.
To open the door
1. Put your registered finger at the scanner and hold on until the green light goes out.
2. Then the door will open automatically, with the LED light turning on inside the safe.
To close the door
Close and hold the door for 3 seconds, the door will lock itself.