Page 7 - Manual - Mobile Air Conditioner G21 - Envi 12H

Remote Control

Instruction for operating remote control:
Power: Press the key to tum on or turn off the machine.
Mode: press the key to switch between cooling, air supply, dehumidification and heating mode.
Up : press the key to increase temperature and timing set value.
Down : press the key to reduce temperature and timing set value.
Fan: press the key to select high, medium and low wind speed output circularly.
Timer: press the key to set timing value.
Swing: press the key to open or close swing style. Air flow of the air outlet can blow at different
angles.
°C-°F: press the key to switch between Celsius and Fahrenheit.

A Variety of Protection Functions

Frost Protection Function:
In cooling, dehumidification or economic power saving mode, if the temperature of the exhaust
pipe is too low, the machine will automatically enter protection status. If the temperature of the
exhaust pipe rises to a certain temperature, it can automatically revert to normal operation.

Overflow Protection Function:
When water in the water pan exceeds the warning level, the machine will automatically sound an
alarm, and the LCD temperature display area will show „FL“. At this point, you need to move the
drainage pipe connecting the machine or the water outlet to sewer or other drainage area to empty
the water.
After the water is emptied, the machine will automatically return to the original state.
Automatic Defrosting (heating and cooling models have this function):
The machine has automatic defrosting function, heating symbol on the display screen will flash.

Automatic Thermal Protection:
To protect the service life of the machine, the machine has automatic thermal protection in heating
mode. During the protection period, the compressor and the lower motor will stop operation and
will automatically return to normal heating state after the temperature of the machine recovers.
To increase the service life of the compressor, it has a 3-minute delay booting protection function
after the compressor is turned off.