Page 7 - Manual – Gas Grill G21 – California BBQ
P. 7

NOTE FOR CONSUMER:  Retain for future Reference


        CONNECTING THE GAS CYLINDER TO THE GRILL
        This appliance is only suitable for use with low-pressure butane or propane gas or LPG mixtures,
        fitted with the appropriate low-pressure regulator via a flexible hose.  The hose should be secured
        to the regulator and the appliance with hose clips. For barbecue which is set to I3B/P(30), I3+(28-
        30/37) use a regulator which operates butane gas at 30 mbar and propane gas at 37 mbar. For
        I3B/P(50), a regulator operates the butane, propane gas mixture at 50mbar. Ensure the regulator
        was certified by standard EN16129. Never store gas cylinder inside the grill.

        Regulator and Hose
        Use only regulators and hose approved for LP Gas at the above pressures. The life expectancy of
        the regulator is estimated as 2 years. It is recommended that regulator is changed within 2 years of
        the date of manufacture. The use of the wrong regulator or hose is unsafe; always check that you
        have the correct items before operating the barbecue. The hose used must conform to the relevant
        standard for the country of use.  The length of the hose must be 1.5 metres (maximum). Worn or
        damaged hose must be replaced.  Ensure that the hose is not obstructed, kinked, or in contact
        with any part  of the barbecue other than at its connection.
        Storage of Appliance
        Storage of an appliance indoors is only permissible if the cylinder is disconnected and removed
        from the appliance.  When the appliance is not to be used for a period of time it should be stored
        in its original packaging and stored in a dry dust free area.
        Gas Cylinder
        The gas cylinder should not be dropped or handled roughly! Always keep the cylinder in upright
        position. during operation. Make sure the cylinder is from any source of flame before you change
        the cylinder.   If the  appliance  is  not in  use, the cylinder  must be disconnected.   Replace  the
        protective cap on the cylinder after disconnecting the cylinder from the appliance. The gas cylinder
        must be sited outside the body of the appliance.
        Cylinders must be stored outdoors in an upright position and out of the reach of children.  The
        cylinder must never be stored where temperatures can reach over 50°C.  Do not store the cylinder
        near flames, pilot lights or other sources of ignition.  DO NOT SMOKE.
        This barbecue is designed for use outdoors, away from any flammable materials.  It is important
        that there are no overhead obstructions and that there is a minimum distance of 3 m from the
        side or rear of the appliance.  It is important that the ventilation openings of the appliance are
        not obstructed.  The barbecue must be used on a level, stable surface.  The appliance should be
        protected from direct draughts and shall be positioned or protected against direct penetration by
        any trickling water (e.g. rain).
        Parts sealed by the manufacturer or his agent must not be altered by the user.  No modifications
        should be made to any part of this barbecue and repairs and maintenance should only be carried
        out by a registered service engineer.
        Since this barbecue has no restriction in the Emission of unburned gas, this barbecue must be
        installed and/or used outdoors or in an amply ventilated area.
   2   3   4   5   6   7   8   9   10   11   12