Page 4 - Manual – Multifunctional Stepladder G21 – GA-SZ

WARNING! IN ORDER TO AVOID THE RISK OF SERIOUS INJURIES OR DEATH
READ THE FOLLOWING SAFETY INSTRUCTIONS PRIOR TO USE AND FOLLOW
THE WARNING SIGNS LOCATED ON THE PRODUCT.

Prior to using the ladder screw down the stabilizer bars.
Remove the protective elements used for transportation from each end of the ladder. Insert the
stabilizer bars into the cut outs on each end of the ladder and secure them with screws and back
plates.

Do not use the ladder without the stabilizer bars unless instructed otherwise in this
! manual.
Prior to stepping on the ladder always check whether the stabilizer bars are
securely tightened.
Use only stabilizer bars supplied with the ladder.

Use of safety mechanism of the safety hinge:

• Prior to use always make sure all safety mechanisms are locked.
• Pull the locking levers in order to release the safety mechanism so that the stopping hinge is in
the position „O“(unlocked)
• Fold the sections of the ladder into desired position. The stoppers will automatically lock in
certain angles and the stopping hinge should be in position L (locked).
Caution! Functionality of the locking mechanism is indicated by a clicking sound.
! However it is recommended to always perform a visual check to make sure the
hinge is in locked position.

= =
Locked Unlocked