Page 5 - Manual Telescopic ladder G21
P. 5

• Pushing or pulling of any object while standing on the ladder can cause flipping over and falling
          down from the ladder. Be very careful while manipulating with objects while standing on the lad-
          der construction.
        • Do not attempt to jump, walk or otherwise move while standing on the ladder. If you need
          to move the ladder, step of the ladder first.
        • In order to avoid loss of balance do not reach out to distant objects while standing on the ladder.
          Always keep your balance and keep your center of gravity between the ladder’s side frames.
        • Do not stand and do not allow anyone else to stand underneath the ladder if it is used by another
          person.
        • This ladder is not a toy as it was not designed to be used by children. Therefore do not keep
          the ladder unattended.
        • Do not step on the ladder while operating the security lock of the ladder.
        • Do not climb higher than 1m from the top rung of the ladder as it increases
          the risk of balance loss.
        • Always use appropriate shoes with firm outsoles. Loose clothes is not  The maximum
          appropriate while using the ladder as the clothes can get stuck   load
          in the ladder’s construction and result in injury.
        • Keep the ladder in dry and clean storage area.
        • If possible, while using the ladder we recommend assistance
          of another person which will control anchoring of the ladder
          rubber feet with its own weight.
        • When the ladder is leant against the wall, always keep the
          approximate angle of 75° (see image below).




        Security lock mechanism                           Of locking
        Important!  Familiarize with the functions       mechanism
        of the ladder parts prior to use!
        • Each rung is equipped with a pair of secu-
          rity locks. This mechanism consists of steel
          pegs which are secured by a spring and are
          automatically pushed into the openings lo-                 1
          cated on the sides of ladder construction.
        • Each mechanism is handled by a lever
          on the outer part of the rung, see image nr.1.         Lever locking
        • The levers have two functions. They show               mechanism
          whether the mechanism is in locked or un-
          locked position and they handle the steel
          pegs of the security locks while extending
          or contracting the ladder.                                 LOCKED
        • Lever closer to the side frame is in locked
          position, lever more distant from the side                 OPEN
          frame is in unlocked position, see image
          nr.2.


                                                                          2
   1   2   3   4   5   6   7   8   9   10